![](../template/hn-aefmc/image/item_sign.gif)
![](../template/hn-aefmc/image/item_sign.gif)
![](../template/hn-aefmc/image/item_sign.gif)
![](../template/hn-aefmc/image/item_sign.gif)
![](../template/hn-aefmc/image/item_sign.gif)
درباره مجله عضویت در مجله شناسنامه مجله ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() مقالات منتشر شده ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() آمار بازدید ![]() ![]() ![]() ![]() ![]() |
صفحه اصلی > Optimization of Micro-Fin Tubes in Dual-Tube Heat Exchangers Using Genetic Algorithm
.: Optimization of Micro-Fin Tubes in Dual-Tube Heat Exchangers Using Genetic Algorithm Optimization of Micro-Fin Tubes in Dual-Tube Heat Exchangers Using Genetic Algorithm
Reza AbdolahPoor sorkhi1*, Mohsen Poorfallah2
1- MSc Student, Mechanical Engineering, Mazandaran University of Science and Technology, Babol 2- Assistant Professor, Mechanical Engineering, Mazandaran University of Science and Technology, Babol
Received: March 2018 Accepted: April 2018
Abstract In this study, laminar flow is considered, and the heat transfer oil is investigated numerically in horizontal, smooth and micro-fin tubes at different fin heights and spiral angles with boundary conditions of constant wall temperature. The variables considered in the micro-fin tubes are the number of fins that varies from 40 to 60, the micro-fin’s height that varies is from 0.2 to 0.5 mm, and the micro-pin spiral angle that varies between 5 and 47 degrees. This study was conducted for Reynolds number ranging from 500 to 100, inner tube diameter of 8.62 and outer diameter of 9.52 mm. The numerical resolution was done using ANSYS fluent v.15 commercial software. The numerical method was validated by comparing the results of simulating laminar flow of oil through a smooth and micro-fin tube with experimental results and previous observations. The simulation results are then used in the genetic algorithm for optimizing the micro-fin geometry. The results showed that increasing Reynolds number and micro-fin height increases the optimum surface. However, a different trend is observed for the desired spiral angle. Keywords: Heat exchangers, Heat transfer coefficient, Micro-fin, Genetic algorithm, Pressure drop. دانلود مقاله : ![]() |
Journal of Science and Engineering Elites www.ElitesJournal.ir www.ElitesJournal.com پست الکترونیک ( ایمیل) : Info@elitesjournal.com تلفن دبیرخانه: 44258197 -021 ساعات پاسخگوئی به تماس: همه روزه از ساعت 11 الی 17 (به جز جمعه ها و ایام تعطیل) فکس دبیرخانه : 89780710-021 |